RV5581Z BASEPLATE

S1 CHAIR

These are used to connect BS95R rail to the sleeper also known as AS1 chair

SHERADISED E-1809

These are used to hold the rail to the baseplate/sleeper in areas where corrosion is high

SPRAYPAINT

Road marking spray Various colours available

SSV7.5ARX BASEPLATE

SSV7.5NX BASEPLATE

ST-113LB INCLINE CHAIR

STEEL KEY

These are used to hold the rail into the chair on BS95R rail section (you can use Oak keys & Panlock keys as well)

SV7.55NX BASEPLATE

SV7.5PB SLIDE CHAIR

These are used to connect the stock rail to the sleepers. The switch rail then slide to give the opening for the turnout, there are PSV, PSV1, PSV2, PSV3 & PSV4

SWITCH BLOCK

These cast iron blocks & are bolted to the stock rail. They are used to hold the gauge in place when trains are operating over the turnouts & are for 56e1 & BS95R rail sections Block Range from 1 to 7 & for 'A' to 'E' switch assemblies

SWITCH HEEL BLOCK

These are used on the back of 56e1 Vertical switches to hold the stock rail & the switch together Range PCV1-PCV5

TTV17 BASEPLATE

TTV20L BASEPLATE

V4N4 CHAIR NEW

These are used to attach the rail to the sleeper. We have new and serviceable available

VA BASEPLATE

These are used at various positions in the turnout depending on what is required Range VA126 to VA450 in 6mm steps new & serviceable

VB BASEPLATE

These are used at various positions in the turnout depending on what is required Range VB234 to VB3780 in 6mm steps new & serviceable

VC BASEPLATE

These are used at various positions in the turnout depending on what is required Range VC348 to VC486 in 6mm steps new & serviceable

VD BASEPLATE

These are used at various positions in the turnout depending on what is required Range VD456 to VD600 in 6mm steps new & serviceable

VJB258 BASEPLATE

VP SLIDE CHAIR NEW

These are used to connect the stock rail to the sleepers. The switch rail then slide to give the opening for the turnout, there are PSV, PSV1, PSV2, PSV3 & PSV4

VSP1 SLIDE CHAIR SERV

These are used to connect the stock rail to the sleepers. The switch rail then slide to give the opening for the turnout, there are VSP & VSP1

WELDED COMMON PLATE

These are used with any rail section required & used to secure the rail to the baseplate using rail clip & then to the sleeper using coach screw these have welded shoulders on. Can also be made to accommodate check rails

WHITE INSULATORS

These are used to between the rail & the chair for insulationg purposes & guage adjustment for differing rail sections