1810 YELLOW CLIPS LH

These are used to hold the rail to the baseplate/sleeper

290mm SRS BOLT (11.5")

These are used to hold the rail together through he crossings & other areas where required to & range from 150mm (6") in length to 770mm(30") in 20mm steps. The S.R.S. is as follows S=Square head. R= round shaft. S= Square nut. All measurement for these bolt are taken from the underside of the head to the end of the bolt

401A PANDROL CLIPS

These are used to hold the rail to the baseplate/sleeper

402A BLUE LH CLIP

These are used to hold the rail to the baseplate/sleeper

5.5mm CV PAD

These are to be placed between the rail & the baseplate

5.5mm H PAD

These are to be placed between the rail & the baseplate

51mmCL CHECK CHAIR

These are used for connecting a 56e1 non raised check rail to 56e1 running rail clearance range 41mm to 57mm

6650 PAD

These are to be placed between the rail & the baseplate

75LB STR FISHPLATE

These are used to connect 2 lengths of BS75R rail together 

8" COACH SCREW

These are used to secure the baseplate/chair to the sleeper/timber through the nose

8AV BASEPLATE NEW

These are used at the Nose of the Crossing for 56e1 rail crossings these range from 3AV to 18

8X-113LB INCLINE XING BASEPLATE

These are used at the Nose of the Crossing for 56e1 rail crossings these range from 3Xto 18X inclined crossings