N BH CROSSING BLOCK

These are Neck Crossing block for BS95R Crossing and range from 1 in 4 to 1 in 18 they are used to keep the wing rail in place on the crossing (at the neck/Rail bend)

NARROW GAUGE COACHSCREW

These are used to connect plate to the sleepers on smaller rail section turnouts (Narrow Gauge)

NARROW GAUGE WEIGHTED LEVER BOX

These are used to throw the switches on narrow gauge turnouts, these are weighed to hold the opening not sprung type for standard guage

NEW BH OAK KEY

These are used to hold the rail into the chair on BS95R rail section (you can use Steel keys Panlock keys as well)

ORANGE INSULATORS

These are used to between the rail, the chair & the rail clip, for insulating purposes 

P INCLINE SLIDE CHAIR NEW

These are used to connect the stock rail to the sleepers. The switch rail then slide to give the opening for the turnout, there are PSV, PSV1, PSV2, PSV3 & PSV4

PAN V CHAIR (SERVICEABLE)

These are used to attach the rail to the sleeper. We have new and serviceable available

Pan V Pad Lipped 5.5mm 094 for 250mm baseplates

These are to be placed between the rail & the baseplate can be supplied in 5.5mm 7.5mm 10mm thicknesses

PAN11 CHAIR

These are used to attach the rail to the sleeper. We have new and serviceable available

PAN14 CHAIR

These are used to attach the rail to the sleeper. We have new and serviceable available

PAN60 CHAIR

These are used to attach the rail to the sleeper. We have new and serviceable available

PANLOCK FASTENER 95lb

These are used to hold the rail into the chair on BS95R rail section (you can use Steel keys & Oak keys as well)

PANZ PERY BASEPLATE

Pressed Steel baseplate

These are used with any rail section required & used to secure the rail to the baseplate using rail clip & then to the sleeper using coach screw these have welded shoulders on. Can also be made to accommodate check rails

PURPLE FASTCLIP

These are used to hold the rail to the baseplate/sleeper

PV PADS

Rail pads (sole plates), are elastic polyurethane mats placed between steel rails and rail sleepers to protect the sleeper top from impact & wear.

PV SLIDE CHAIR NEW

These are used to connect the stock rail to the sleepers. The switch rail then slide to give the opening for the turnout, there are PSV, PSV1, PSV2, PSV3 & PSV4

PV2 SLIDE CHAIR (SERVICEABLE)

These are used to connect the stock rail to the sleepers. The switch rail then slide to give the opening for the turnout, there are PSV, PSV1, PSV2, PSV3 & PSV4

PVT2L SLIDE CHAIR

These are used to connect the stock rail to the sleepers. The switch rail then slide to give the opening for the turnout, there are PSV, PSV1, PSV2, PSV3 & PSV4

PX0 INCLINE SLIDE CHAIR NEW

These are used to connect the stock rail to the sleepers. The switch rail then slide to give the opening for the turnout, there are PX0, PX1, PX2, PX3, PX4, PX5 & PX6

RCV CHECK CHAIR SERV

RCV CHECK CHAIR SERV

RED INSULATORS

These are used to between the rail, the chair & the rail clip, for insulating purposes 

ROSEHEAD SPIKE

These are used to secure the rail to the sleeper